Solution M SL - Więcej informacji

Informacja o produkcie

  • Długość:

    370 mm

    Szerokość:

    540 mm

    Wysokość:

    615 mm

  • Waga:

    5 kg

  • Pielęgnacja:

    Tapicerkę można prać w pralce w temperaturze 30°

  • W zestawie:

    Fotelik samochodowy

  • Zaprojektowany i skonstruowany w Niemczech

    Zaprojektowany i skonstruowany w Niemczech

  • UN R44/04

     

The pictures of products and the measurements on this website are for indication purpose only. Products may vary and we reserve the right to make product changes.

Kompatybilność

Czy ten fotelik jest kompatybilny z moim pojazdem?

Fotelik jest uniwersalnym produktem i może być zamontowany w każdym samochodzie wyposażonym w 3-punktowe pasy bezpieczeństwa. Zawsze jednak rekomendujemy testowy montaż w sklepie partnerskim przed zakupem, aby ocenić dokładnie każdy przypadek. Szczególnie ważna jest długość pasa oraz uchwyty Isofix. Mogą one czasami różnić się w zależności od wersji auta, rocznika produkcji itp.

If you have any further questions, please contact us

Zapytaj nas

FAQ

Czy mogę używać fotelika po wypadku?

CYBEX zaleca wymianę fotelika po jakimkolwiek wypadku ponieważ nawet najdrobniejsze uszkodzenia, niewidoczne dla oka, mogą pojawić się na skorupie fotelika. Uszkodzenia te mogą stanowić niebezpieczeństwo dla dalszego użytkowaniu fotelika.

Gdzie mogę naprawić fotelik?

Problem należy zgłosić u partnera handlwego, u którego produkt został zakupiony.

What does L.S.P. system stand for?

The abbreviation L.S.P. stands for Linear.Side-Impact.Protection. The L.S.P. system is responsible for the shoulder and head protectors systematically absorbing the forces of a side impact in a linear chain reaction. The kinetic body energy triggered in an accident is absorbed and the head and upper body moved in a safe position. Especially the sensitive head and shoulder area is protectively locked inside the safety zone of the seat. The L.S.P. System Plus features additional side protectors.

Gdzie mogę zakupić części zamienne?

W celu zakupu części zamiennych bardzo prosimy o kontakt z naszym autoryzowanym serwisem: https://www.cybex-service.pl/

Do child seats equipped with a backrest perform better than booster seats?

The main problem with booster seats is the missing side protection. A child seat with a backrest has side protectors that prevent the child from hitting the window in the case of a side impact collision. Additionally, the routing of the seat belt can not be adjusted to the height of the child causing possible health hazards. Therefore, compared to seats with a backrest, booster seats do pose a higher risk of injury.

Can I use the child seat on rearward facing car seats like those found in vans or minibuses?

You can use this child seat on rearward facing car seats as long as the vehicle seat has a homologation for use by adults and a 3 point belt. The headrest of the vehicle seat should not be removed when the child seat is mounted.

Can I use the child seat on lateral facing car seats?

It is not permissible to use the child seat on lateral facing car seats.

Is it ok to install the seat on the passenger seat?

CYBEX Group 2/3 seats can be used in all seats of the car with a three-point emergency locking retractor belt. However, we recommend generally using the seat in the back of the car. Statistically, the front seat poses a higher risk of injury for your child. In exceptions, however, the seat can be used in the passenger seat as well. Please note the following: If the car has an airbag, put the seat as far back as possible. However, you should pay attention that the upper part of the seat belt stays behind the running of the belt.

When I fasten my child´s safety belt, the belt no longer automatically retracts. What can I do?

The wide range of vehicle seats means that, in some cases, the safety belt may not run smoothly to the child safety seat. If this is the case, first check whether the height of the safety belt can be adjusted in the car. If possible, adjust the height of the belt so that it runs straight and smoothly through the child safety seat´s belt positioner. Alternatively, the problem may be alleviated if the vehicle seat can be adjusted horizontally, vertically and/or at an angle.

Is it normal that the seat’s backrest is not completely locked and has a bit of room to wiggle when the seat is not installed in the car?

The reclining backrest is part of the CYBEX safety concept. Thanks to the automatic adjustment mechanism, it adapts perfectly to any car seat. In the worst-case scenario, the backrest moves slightly forward with your child, and is thereby able to ‘catch’ the body at an earlier stage. The seat and backrest are connected to each other, but are not rigid and don’t lock into place.

Can I use this seat on a flight?

No, this seat is not approved for use on an airplane.

Can child seats equipped with ISOFIX Connect System also be used in cars that do not have the connectors?

CYBEX car seats that are designed with the ISOFIX Connect System can also be used in cars that are not equipped with ISOFIX. Simply rotate the ISOFIX connectors 180° and then push the connectors in, as far as possible, into the booster seat.