CYBEX Platinum
Cloud Z2 i-Size
Allround flexibiliteit en comfort tot 24 maanden met de Cloud Z2 i-Size autostoel voor baby’s. Met een gloednieuwe functie waarmee de stoel in de ligpositie kan voor de meest comfortabele ritjes en 180° rotatie zodat je je kindje er eenvoudig in kunt leggen. (Base Z2 apart verkrijgbaar )
- Leeftijd 0 - 24 maanden
- Hoogte 45 - 87 cm
- Gewicht max. 13 kg
- Regulation UN R129/03
- 45 - 87 cm
-
Recline Function in car
-
- 10%
Kleur:
Rockstar
Dit product is niet meer beschikbaar
of
Prijzen
Productcode: 522000607 (Rockstar)
Productgegevens
Wil je jouw kleine jongen of meisje rijden als een koning, en dat met een gerust hart? Ontdek de Cloud Z2 i-Size uit onze nieuwe Rockstar-collectie, met een opvallende rode luipaardprint en glamoureuze gouden patches.
De Cloud Z2 i-Size heeft een nieuwe functie waarmee je de autostoel in een liggende positie kunt zetten. Zo kan je kind zich tijdens de rit heerlijk ontspannen en krijg jij ook meer rust tijdens het rijden. Gebruik de Cloud Z2 i-Size buiten je auto voor maximale flexibiliteit, waarbij de stoel in een volledig liggende positie kan, als onderdeel van een reissysteem met een kinderwagen. Met het geïntegreerde zonnescherm creëer je schaduw in en buiten de auto, in elke ligpositie. De autostoel voor baby's is echt de perfecte hulp, waar je ook heen gaat.
Uitgelichte functionaliteiten:
- Gemakkelijke instappositie
- Lekker slapen, waar je ook heen gaat
- Comfortabel op reis
Rockstar Collection
Voor de Rockstar-collectie bundelde CYBEX de krachten met de Duitse muzikant Alec Voelkel, ter ere van de geboorte van zijn dochter. Hoge kwaliteitseisen en rock-’n-roll erfgoed resulteert in een collectie voor altijd. Het is een iconische line-up van producten die pure rock-energie geven aan elke reis met je kleintje.
Technische specificaties:
- i-Size-norm, UN R129/03
- Lengte van kind: van 45 cm tot 87 cm
- Gewicht van kind: max. 13 kg
- Leeftijd: Van de geboorte tot ongeveer 24 maanden
Functionaliteiten:
- Z2 Line modulair systeem
- Geïntegreerd LSP-systeem
- XXL-zonnescherm
- In hoogte verstelbare hoofdsteun
- Verwijderbaar inlegstuk voor pasgeboren baby
Verzorgingsinstructies:
- Stoffen hoezen kunnen in de wasmachine op 30°
Compatibiliteit van product:
- Base Z2
- Zomerbekleding
- Zonnescherm
- ISOFIX-handleidingen
- Insectennet
- Regenhoes
- Snogga Mini
- Platinum wintervoetenzak mini
- Voetenzak Z
- SensorSafe 4-in-1 Kit Infant
Installatie met base (optie 1): Let op het i-Size-logo. Als dit logo op een autostoel in je auto staat, is je auto geschikt voor gebruik met alle i-Size-autostoelen en dan staat hij niet in onze lijst met geschikte auto’s. Als je auto geen stoel met i-Size-logo heeft, controleer dan of je auto geschikt is. Als je auto niet in de lijst staat, neem dan contact op met onze klantenservice.
Installatie met gordel (optie 2): De draagzak voor baby's kan op alle autostoelen met automatische driepuntsgordel in de auto worden gebruikt.
- Gemakkelijke instappositie
- Dankzij de 180° rotatie draait de Cloud Z2 i-Size richting de autodeur, zodat je je kind eenvoudig in en uit de auto helpt. Als je tijdens de reis even pauze hebt, kun je de stoel ook naar je toe draaien. Zo kun je gezellig iets met je kind eten of samen een spelletje doen.
- Lekker slapen, waar je ook heen gaat
- Met de Cloud-series ontwikkelde CYBEX een ergonomische liggende positie voor gebruik buiten de auto. Naast deze innovatieve functie kan de nieuwe Cloud Z2 i-Size in de auto ook in een halve ligpositie gezet worden. Meer comfort voor je kind, zonder afbreuk te doen aan de veiligheid op de weg.
- Comfortabel op reis
- Met de adapters kun je de Cloud Z2 i-Size aan de meeste kinderwagens en buggy's van CYBEX, gb en andere geselecteerde merken bevestigen. Daarom kun je de autostoel voor baby’s gebruiken als onderdeel van een reissysteem buiten de auto, voor extra comfort, gebruiksgemak en mobiliteit.
- Bescherming tegen zijdelingse botsingen
- De Cloud Z2 i-Size beschikt over het uitvoerig geteste CYBEX Linear Side-impact Protection (LSP)-systeem voor meer bescherming o…
- Eén base, twee stoelen
- De Base Z2 is de stevige basis van het CYBEX Z2 Line modulair systeem en…
- Volledige bescherming tegen de zon
- De royale overkapping biedt jouw kind niet alleen UPF50+ bescherming teg…
- Groeit mee met je Kind
- De verstelbare hoofdsteun heeft 12 posities, zodat je de stoel kunt aanpassen w…
- Een goede pasvorm voor de allerkleinsten
- De Cloud Z2 i-Size heeft een verwijderbaar inlegstuk voor pasgeboren baby’s, waarmee je een bijna platte l…
Video
Controleer de compatibiliteit van je auto
Om er zeker van te zijn dat deze autostoel geschikt is voor installatie in jouw voertuig, gebruik je onze Car Compatibility Checker.
Base Z2
Aanbevolen
De Cloud Z2 i-Size kan snel op en uit de Base Z2 worden geklikt wanneer je hem in de auto moet zetten of uit de auto moet halen. De base wordt geïnstalleerd met behulp van een belastingspoot en ISOFIX. De Base Z2 zorgt voor veiligheid en stabiliteit en kan ook later worden gebruikt met de Sirona Z2 i-Size. Zoek naar het i-Size-logo in je auto om de geschiktheid te controleren. Als er geen i-Size logo staat, maar je auto wel ISOFIX heeft, kijk dan in onze Car Compatibility tool.
Autogordel
Als je auto geen ISOFIX heeft, kun je de autostoel voor baby's ook zonder base installeren met behulp van de gordel van de autostoel. Maak de gordel rond de autostoel voor baby's vast om deze op zijn plaats te houden. Let op: je moet dit elke keer doen als je het stoeltje in of uit de auto haalt.
Afmetingen
- Lengte
- 645 - 750 mm
- Breedte
- 440 mm
- Hoogte
- 380 - 605 mm
- Gewicht
- 4.6 kg
Wat is inbegrepen?
- Cloud Z2 i-Size autostoel voor baby's
- Inlegstuk voor pasgeboren baby
- Gebruikershandleiding
How do I know if my car seat is suitable for an aircraft?
You can determine if your car seat is aircraft approved if it has the TÜV Rheinland seal with the reference “For Use in Aircraft”. Car seats with this seal are specifically tested for safety and use with a two-point harness system, as found in an aircraft. Please note, that not every airline recognizes this seal as valid, therefore it is essential to refer to your airline’s regulations to confirm whether you can use your seat, even if the seat has the seal of approval.
Will the car seat fit in my vehicle?
It is important to check whether the car seat is compatible with your vehicle before you purchase it. The car seat is approved for use in i-Size compatible vehicle seating positions as indicated by vehicle manufacturers in their vehicle User Guides. If your vehicle does not have an i-Size seating position, please check the Car Compatibility Checker on the CYBEX Website.
How do I know when my child needs to change to the next car seat?
We generally advise against prematurely switching from an infant car seat (45-87 cm, max. 13 kg, from birth up to approx. 24 months) to the next seat. Even if your child’s feet protrude outside the infant car seat, or if your baby can already sit up, your child has not necessarily grown out of the seat. However, if your child's head is protruding above the top edge of the seat and your child already weighs over 13 kg, it is time to change the seat as it will no longer provide sufficient protection to the child’s vulnerable neck and head area.
Can I use this car seat on a flight?
No, this car seat is not approved for use on an airplane.
Can I also use the infant car seat without the base?
Yes, your infant car seat can be installed in a car without using a base: In this instance, the car seat is installed using the vehicle belt. This is useful when travelling in a taxi or a second car. However, we recommend using the infant car seat in conjunction with the base, for better safety and stability. If installing the infant car seat on the front passenger seat, it is important to ensure that the front airbag has been deactivated.
Is it ok to keep using a car seat after an accident?
We at CYBEX strongly recommend that you replace a car seat after any kind of accident. This is because tiny hairline cracks, which may not be visible to the naked eye, can appear in the plastic parts of a car seat after an accident. These cracks can pose an increased risk to safety.
My car seat is faulty, how can I get it repaired?
Please refer to the retailer where you bought your CYBEX car seat. They will deal with the matter on your behalf.
Where can I get replacement parts for my product?
You can order replacement parts from a specialist retailer near you. To find a store near you, simply go to the Store Locator on the CYBEX Website.
When should I remove the newborn inlay?
The newborn inlay has to be removed when your infant reaches a height of 61 cm (corresponding to approximately 3 months). This ensures that your growing baby has enough space in the car seat.
How do I correctly secure my child in the seat?
Please observe the instructions in the User Guide. Adjust the child car seat to the size of your child and make sure that he or she is properly strapped in to ensure maximum safety.
When I remove the base from the vehicle it emits a warning signal. How can I stop this noise?
When the load leg is adjusted the base will emit a warning signal indicating that it is not correctly installed. If you want to remove the base from the vehicle, first push the load leg upwards to its uppermost position by pushing the adjustment button. Then fold the load leg back for storage within the base. The warning signal will stop when the load leg is fully folded back and in the designated area. If the base is not to be used for a long period of time the battery should be removed to avoid potential damage caused by leaking fluids.
Can I wash the newborn inlay and car seat cover in the washing machine?
Yes, both are washable. We recommend using a delicate wash cycle and a maximum temperature of 30 degrees Celsius. Detailed instructions can be found in the User Guide.
Can I also use the infant car seat in a car without ISOFIX anchorage points?
When this infant car seat is used in conjunction with a base, it can only be installed either in i-Size approved vehicles or in vehicles with ISOFIX anchorage points. If you are installing the car seat with the vehicle’s 3-point belt, ISOFIX anchorage points are not required. Before purchasing the seat, please refer to the Car compatibility list on our website to see whether or not the car seat is compatible with your vehicle.
How can I clean my car seat?
Car seats can be cleaned using a vacuum cleaner or damp cloth. Sand or other dirt beneath the cover can also be removed in this way. To clean the plastic parts of the car seat wipe them with a cloth using a mild detergent and warm water. (Warning: Please do not use chemical detergents or bleaching agents under any circumstances.) Please note that a car seat should never be dismantled for cleaning. Please always refer to your car seat’s User Guide when carrying out care and maintenance on your car seat. Generally the seat covers are machine washable at a maximum temperature of 30˚C on a delicate cycle. If you wash them at a higher temperature, the cover fabric might lose its color or shrink. Please wash the cover separately and never dry it by machine or in direct sunlight. (Warning: Only the cover of the car seat can be machine washed. The car seat itself is not machine washable.) Should you wish to clean a car seat more thoroughly than recommended above, you will have to have it cleaned professionally. Please ask the retailer who sold you the car seat to refer you to a professional service.
When I install the car seat using the vehicle belt, my baby’s head nods forward onto his/her chest even though the seat appears to be positioned horizontally. How can I prevent this?
If your child’s head is nodding forwards while sat in the infant car seat belted with the vehicle belt, this may indicate that the infant car seat is not positioned at a horizontal level, even though the symbol on the seat seems to indicate that it is. One reason for this is that many vehicle seats have a relatively steep incline, especially in smaller vehicles. Therefore, when installing the infant car seat it is best to use the level of the road as a guide to the correct level of the car seat, rather than the angle of the vehicle seat. Another option is to install the car seat in a flatter recline position. If your baby’s head continues to nod forward even when the seat is aligned with the level of the road or you are using the base, then it is possible that the baby is not wearing suitable clothing. Please refer to the question: What kind of clothing should my child wear when seated in the car seat.
Can I install a rear-facing seat on the front passenger seat?
Rear-facing car seats must only be installed on the passenger seat if the front airbag has been deactivated. Placing your child on a passenger seat with an activated airbag poses an enormous risk of injury, and we at CYBEX strictly advise against this. For other types of car seats check the user manuals of both your car seat and your vehicle to find out if you should deactivate the airbag. Statistics show that the safest place for a car seat is on the rear seat behind the front passenger seat. Side airbags do not put your child’s safety at risk. If you have no choice other than to use the front passenger seat, please ensure that the seat is pushed back as far as possible and that the airbag is deactivated.
How should the headrest be adjusted?
Only a headrest adjusted to the optimum height will give your child the best possible protection and comfort. The height can be adjusted to various positions. The headrest must be adjusted so there is no more than 2 cm between the child’s shoulders and the bottom of the headrest.
Can I use the car seat on laterally-facing vehicle seats?
It is not permitted to use the car seat on laterally-facing vehicle seats.
Can I use the car seat on rear-facing vehicle benches (e.g. in vans or minibuses)?
No. As you can only use this car seat rear-facing, it cannot be used on rear-facing vehicle benches. A rear-facing car seat on a rear-facing vehicle bench would be front-facing when installed.
Can I also use this infant car seat on a vehicle seat without an i-Size certification?
Yes, this infant car seat can be used on certain vehicle seats without an i-Size certification. It is possible for the infant car seat to be installed on forward-facing vehicle seats equipped with a 3-point automatic belt system in accordance with UN Standard R16. If your vehicle does not have an i-Size seating position, please check the car compatibilty on our website to find out whether installation with a 3-point belt is possible.
What should I bear in mind when installing the car seat in my vehicle?
Before purchasing the car seat, it is important to check if it is approved to be used in your vehicle. In case you want to use the infant car seat with the corresponding i-Size Base, the vehicle should have an i-Size seating position that is compatible with your i-Size Base. If you have no i-Size seating position, please scan the dedicated QR-Code on your "Quick Start Guide" or use the specific weblink provided on the Packaging Box, to access the Car Compatibility Tool of your product. Cloud Series and Aton Series car seats can be used without Base on all vehicle seats which are equipped with an automatic 3-point vehicle belt. For proper protection of your child, it is essential to use and install the car seat according to the instructions given in the User Guide. It can be downloaded via the CYBEX Website.
Can I install this infant car seat on the front passenger seat?
This infant car seat should only be installed on the passenger seat if the front airbag has been deactivated. Important: According to rules of the road such as the Highway Code in the UK, it is forbidden for your child to travel on a seat with an activated airbag. Placing your infant on a passenger seat with an activated airbag puts your child at risk of serious injury. If you have no choice other than to use the front passenger seat, please deactivate the airbag and ensure that the seat is pushed back as far as possible. As a rule we always recommend installing the car seat on the vehicle’s rear seat (if possible behind the passenger) as statistics show that this is the safest place in the car. In a head-on collision, a child will be protected by the larger crumple zone of the rear seat where front airbags do not put your child’s safety at risk.
Where should I install a car seat in my car?
Although it may be possible to install a CYBEX car seat on other seats in the vehicle, the safest place for a car seat is in the rear seat, behind the front passenger seat. We advise you to refer to the Car Compatibility Tool on the CYBEX Website. You can scan the dedicated QR-Code on your Quick Start Guide or use the specific weblink, provided on the Packaging Box, to access the Car Compatibility Tool for your product.
Can I use the Cloud Z2 i-Size with a Base Z?
No, the Cloud Z2 i-Size and the Base Z are not compatible.
Can I use the car seat even when the side airbag is activated?
Yes, the side airbag can remain activated when using the car seat.
Are both side-impact protectors (L.S.P.s) needed?
The Linear Side-impact Protection (L.S.P.) reduces the forces of a side-impact collision and thus also the risk of injury. Generally, we advise parents to install or fold out the L.S.P. on both sides of the car seat. However, if there is insufficient space for the L.S.P. nearest the middle of the vehicle, it is not absolutely essential. For safety reasons, please ensure that the L.S.P. nearest the door is always installed or folded out.
The car seat is approved in compliance with the i-Size standard (UN R129). What does this mean?
i-Size is a European standard for car seats. Among other regulations i-Size states that infants must travel in a rear-facing position before the child's age exceeds 15 months and that, for the first time, side-impact protection is tested. To find out more about i-Size, check our Safety page on the CYBEX Website.
When does a car seat expire?
As soon as a car seat is installed in a vehicle, it may be exposed to high temperatures and high levels of light intensity. As a result, even high-quality and extremely age-resistant plastics such as those used by CYBEX can display certain age-related alterations. To ensure the safety of your child, we strongly recommend that the seats are not used for longer than the prescribed usage periods. A car seat will be designed to keep your child safe for a specific period in their development, for example from birth to approximately 4 years old for a Sirona Series seat. Sometimes they can be used for longer, for example our products for babies and toddlers can also be used for a sibling. To find out the approximate lifespan of your CYBEX car seat, refer to the User Guide or contact our Customer Service.
Can my child sit in a forward-facing position in the car seat?
No, according to the UN Standard R129 children have to travel in a rear-facing position until they are at least 15 months old. This is because your infant’s spine and neck muscles have not yet developed sufficiently to cope with the heavy strain of a front collision. If the child is travelling in a rear-facing position, the forces of an impact are distributed evenly over the large area of the car seat shell. The strain on the neck, head, and chest is significantly reduced, reducing the risk of injury when compared to a forward-facing car seat. While the minimum requirement for rear-facing travel is up until the child is 15 months old, given the current state of child restraint technology we recommend keeping your child rear-facing for as long as possible. To this end, this seat is designed to only be used in a rear facing position.
Can I leave my child in the infant car seat outside the car, for example at home?
CYBEX infant car seats have been engineered to offer the best possible protection for a baby during a car ride without affecting the child´s spine in a negative way. The Cloud Series also allow a lie-flat position outside the car. However, for safety reasons we do not recommend leaving the baby sat in the infant car seat for long periods of time, whether inside or outside the car.
What kind of clothing should my child wear when seated in the car seat?
Thick clothing prevents the harness/vehicle belt or impact shield from lying tight against the body of the child. Only a correctly adjusted restraint system can offer maximum protection. For this reason, your child should wear everyday clothing. Thick clothing such as winter jackets and clothing with hoods (e.g. hoodies) as well as hats should be avoided where possible. Once your child has been positioned in the car seat, he/she can be covered with an extra blanket for warmth.
When will a child grow out of this infant car seat?
This infant car seat can be used from birth up until the child is approximately 24 months old (maximum body height 87 cm, maximum body weight 13 kg).
Do I need a newborn inlay for a car seat?
Yes, a newborn inlay is necessary to help very young and small babies lie in a safe and comfortable position in the car seat. These are specially designed to meet the anatomical requirements of newborn or very small babies. All CYBEX infant car seats include removable newborn inlays. Usually these can be removed when your child has reached a height of 61 cm, however always refer to the user guide provided with the product to ensure it is removed at the appropriate time.
How does the new recline position work?
In case the seat is used with a Base Z2, the new recline position is easily adjustable with only one hand, allowing for a more comfortable position for the child. For safety reasons this does not apply for a belted installation. In addition, the infant car seat can be adjusted to an almost lie-flat position outside the vehicle, e.g. as part of a travel system.
Can my child sleep in the car seat?
By using our Cloud Z2 i-Size car seat with a Base Z2, it can be adjusted to a flatter reclining position inside the car, which also allows the child to sleep in the vehicle. For safety reasons this does not apply for a belted installation. For further details on how to recline the car seat, please refer to the product User Guide.
Can my child sleep in the infant car seat while being in the car?
When you use our Cloud Z2 i-Size or Cloud T i-Size car seat with a Base Z2 or a Base T, it can be adjusted to a flatter reclining position inside the car, which also allows the child to sleep in the vehicle. For safety reasons the recline cannot be used when the car seat is installed with the vehicle seat belt. For further details on how to recline the car seat, please refer to the product User Guide.