Can I also use the e-PRIAM without assistance from the electronic functions?
Yes, if you do not switch on the power button the e-PRIAM can still be pushed around like a
regular PRIAM.
How do I charge the battery and how often does it need recharging?
A charging cable is provided in the product package. You have a choice between directly
attaching the cable to the stroller, or detaching the battery from the rear axle for charging. Never
leave the e-PRIAM unattended while charging the battery. The battery must be charged until a
green light shows on the charger. Charging time is around 3.5 hours, although when you charge
the e-PRIAM for the first time this can take up to 6 hours depending on the battery status when
you unpack the product.
The battery run time depends on external conditions such as surface characteristics,
temperature and incline, as well as the load, for example the weight of the child and items in the
basket.
In fair conditions (flat terrain with short hills and a few uneven surfaces, an outside temperature of
approximately 20˚C, a load of 9–10 kg) the battery will last for approximately 45 km.
In difficult conditions (outdoor terrain with short hills and many uneven surfaces, an outside
temperature of approximately 10–20˚C, a load of 15 kg) the battery will last for approximately 20
km.
In extreme conditions (rugged terrain with very long and steep hills and mostly uneven surfaces,
an outside temperature below 10˚C, a load of 25 kg) the battery will last for approximately 8 km.
The values mentioned above are estimates. The real values might differ or vary according to
usage, external influences and the condition of the battery. Additionally, the capacity of the
e-PRIAM’s lithium-ion battery decreases with age and usage. This might have an impact on
battery run time. The values mentioned do not assume any liability.
How can I access the Rocking Mode function?
The rocking function can be accessed via our free e-PRIAM app. Download the app, connect it
to your e-PRIAM via Bluetooth, and then you can have the e-PRIAM rock back and forth whenever
you like. You can also use the app to set the intensity level, and the length of time that you’d like
the rocking to continue.
How does the e-PRIAM connect to the e-PRIAM app?
The e-PRIAM connects to the app on your smartphone via Bluetooth. To allow Android
smartphones to connect, enable the location services to connect via Bluetooth. One e-PRIAM can
connect to several different smartphones that have the app installed. However, when there is an
active connection between an e-PRIAM app and an e-PRIAM, it isn’t possible for another phone
to connect to the stroller.
Bear in mind that it’s possible for another phone to connect to your e-PRIAM during the
connection process. To prevent this happening, make sure you are close to your e-PRIAM when
connecting the app.
What happens if either my phone battery or my e-PRIAM battery runs out while
I’m using the Rocking Mode function?
Before you start the Rocking Mode you can check a box to confirm if you want the rocking
to continue if the Bluetooth connection is interrupted. This is included as a safety feature. If you
check the box and your phone battery runs out, the Rocking Mode function will complete the
rocking cycle. If you want to stop the rocking function before the end of the cycle simply switch off
the e-PRIAM.
Otherwise the rocking cycle will stop as soon as the Bluetooth connection between your
smartphone and your e-PRIAM is interrupted. Never leave the child unattended when the
Rocking Mode function is in operation.
If your e-PRIAM battery runs out while you’re using the Rocking Mode function the rocking will
stop immediately, as there will be no power to operate the electric motors.