Cloud Z i-Size

Product information

  • Length:

    670 mm

    Width:

    440 mm

    Height:

    380 mm

  • Weight:

    4.8 kg

  • Maintenance:

    Fabric covers machine washable at 30°

  • What you get:

    Infant Car Seat incl. newborn inlay

  • Compatible Base:

    Base Z, Base Z One
  • Engineered and designed in Germany

    Engineered and designed in Germany

  • UN R129/02

     

The pictures of products and the measurements on this website are for indication purpose only. Products may vary and we reserve the right to make product changes.

Car compatibility

1. Select base

Is this the right seat for my car?

Before buying the child seat, always check whether it can be properly installed in your vehicle. We recommend a test installation at a qualified retailer.

The recommendations of the vehicle manufacturer regarding the installation of child seats must be followed.

INSTALLATION WITH VEHICLE BELT

The infant carrier can be used on all vehicle seats with three-point automatic belt.

INSTALLATION WITH BASE

Pay attention to the i-size logo.

If a vehicle seat is marked with this logo, it is suitable for use with all i-size child seats and therefore will not appear in our list of compatible vehicles.

If your vehicle does not have an i-Size seat, please check the compatibility of your vehicle. If your vehicle is not displayed, please contact our customer service team

Is this the right seat for my car?

Before buying the child seat, always check whether it can be properly installed in your vehicle. We recommend a test installation at a qualified retailer.

The recommendations of the vehicle manufacturer regarding the installation of child seats must be followed.

INSTALLATION WITH VEHICLE BELT

The infant carrier can be used on all vehicle seats with three-point automatic belt.

INSTALLATION WITH BASE

Pay attention to the i-size logo.

If a vehicle seat is marked with this logo, it is suitable for use with all i-size child seats and therefore will not appear in our list of compatible vehicles.

If your vehicle does not have an i-Size seat, please check the compatibility of your vehicle. If your vehicle is not displayed, please contact our customer service team

2. Select car manufacturer

3. Select model and year

If you have any further questions, please contact us

Ask Us

FAQ

Is it ok to keep using a seat after an accident?
We at CYBEX strongly recommend that you replace a seat after any kind of accident. This is because tiny hairline cracks, which may not be visible to the naked eye, can appear in the plastic parts of a seat after an accident. These cracks can pose an increased risk to safety.
My car seat is faulty, how can I get it repaired?
Please refer to the retailer where you bought your CYBEX seat. They will deal with the matter on your behalf.
Where can I get replacement parts for my product?
You can order replacement parts from a specialist retailer near you. To find a store near you, simply go to the store locator on our website: http://cybex-online.com/de/retailer.html
Can I install the seat on the front passenger seat?
The car seat should only be installed on the passenger seat if the front airbag has been deactivated. Important: According to the Highway Code, it is against the law for your child to travel on a seat with an activated airbag. Placing your infant on a passenger seat with an activated airbag puts your child at risk of serious injury. For this reason, CYBEX always recommends installing the car seat on the vehicle’s rear seat (if possible behind the passenger). Statistics show that this is the safest place in the car. In a head-on collision, a child has a greater crumple zone on the rear seat where front airbags do not put your child’s safety at risk. If you have no choice other than to use the front passenger seat, please ensure that the seat is pushed back as far as possible.
Can my child sit in the car seat in a forward-facing position?
No, according to standard R-129 children have to travel in a rearward-facing position until they are at least 15 months old. Your infant’s spine and neck muscles have not yet developed sufficiently to cope with heavier strains. In the event of an accident, the child’s head is propelled forward with a very high force. The child’s spine and neck muscles are not strong enough to withhold these forces. In rear-facing seats, the infant car seat works like a protective shield and protects the child’s sensitive head and neck.
Is it ok to leave my child in the infant carrier e.g. at home?
CYBEX infant car seats have been engineered to offer the best possible protection for a baby during a car ride without affecting the child´s spine in a negative way. However, we do not recommend leaving the baby sleeping inside the infant car seat at home for long periods of time.
What kind of clothing should my child wear when seated in the car seat?
Thick clothing prevents the harness from lying snugly against the body. This incorrect belt positioning could result in the harness slipping off the shoulder. For this reason, your child should wear everyday clothing. Thick clothing such as winter jackets should be avoided where possible. Once your child has been positioned in the seat, he/she can be covered with an extra blanket for warmth.
Can I use the car seat and base even when the side airbag is activated?
Yes, the side airbag can remain activated when using the car seat.
Do both side protectors (LSPs) have to be extended?
The L.S.P. Side-impact Protection has to be folded out on the side nearest the car door when the seat is installed either on the right or left-hand side of the rear seat. In this way, the best possible protection is provided in a collision. In this instance, it is important to ensure that only the side protector nearest the door is extended. If the seat is installed in the middle of the rear seat, the Linear Side-impact Protection (L.S.P. system) must not be used under any circumstances.

We use cookies to give you the best experience on our website. By using our services, you agree to our use of cookies. More info