Cloud Q infant car seat
Luxury Travel redefined
The belted Cloud Q emerged as test winner in Group 0+ in the test 06/2015 conducted by German Stiftung Warentest. It was the only car seat in the test that achieved the grade "very good" in the safety category. The premium infant car seat sets itself apart as a perfect symbiosis of phenomenal protection and a new kind of travel system for outstanding safety in and outside of the car.
- Ergonomic lie-flat position outside the car
- Removable newborn inlay for premature and very small babies
- 11-position height-adjustable headrest with integrated harness guides
- Telescopic Linear Side-impact Protection (L.S.P. System)
- Integrated XXL foldaway sun canopy
- Travel system compatible with strollers and buggies from CYBEX, gb and other selected brands
- Complies with the new ECE R-44/04 Supplement 7
Thanks to a lie-flat position the infant car seat turns into a carry cot outside of the car. This innovative travel system is complemented by a telescopic linear side-impact protection, a near-flat lying angle also inside the car and an XXL sun protection with UVP50+. The 11-position height-adjustable headrest of the infant car seat simultaneously changes the harness length and sitting angle. As a result, the infant car seat grows with the child.
Ergonomic lie-flat position outside the car
A new function of the Cloud Q is that it can be changed to a horizontal position outside of the car. With a longer leg-rest and a lie-flat position, the child can lie comfortably and in an ergonomically correct position.
The angle can be adjusted easily with one hand without having to take the child out of the carrier, and the handle remains in the carrying position for easier mobility. In combination with the CYBEX pushchairs, the Cloud Q can be used as a visually harmonious travel system. Thanks to the flat lying angle, the infant car seat transforms into a practical and clever carry cot for the first months. The sleeping baby can rest with optimal protection and in an ergonomically correct position.
REMOVABLE SEAT INSERT
For a near flat and ideal lying position
One of the biggest challenges for safety engineers is the best possible transportation of premature babies and very small newborns, whose neck muscles and reflexes are not yet well enough developed. Unfortunately, this can lead to the baby's head tipping forward while it sleeps, which can lead to serious breathing problems.
Along with German doctors and midwives, and taking into account the findings of many tests, a function was developed that enables a near flat lying angle between head, neck and chest. The risk of suffocation is thereby significantly reduced. This is achieved through a removable seat insert, which also offers more space and comfort for bigger children once removed.
Telescopic L.S.P. System
Telescopic Linear Side-impact Protection
The telescopic Linear Side-impact Protection (L.S.P. System) absorbs the force of a side-impact collision in combination with the energy-absorbing shell.
The telescopic Linear Side-impact Protection can be easily and individually adjusted. The very first forces of an accident are transferred by the extended side protector facing the door and are distributed to the car seat's shell. The flexible material and structure of the infant car seat then absorbs the forces of an impact and channels them away from the baby.
11-position height-adjustable headrest
For perfect protection that grows with the child
In combination with the telescopic Linear Side-impact Protection System the height-adjustable headrest adds to the excellent side-impact protection of the Cloud Q infant car seat.
With the new 11-position height-adjustable headrest with integrated harness guide, the length of the harness changes automatically when the headrest is adjusted. This prevents any need for the difficult threading in and out of the harness and makes it almost impossible to misuse.
Matching integrated xxl fold-away sun canopy
Perfect sun and wind protection with UVP50+
For maximum protection of baby's skin, the matching XXL fold-away sun canopy fulfils the stringent, Australian UVP50+ sun protection standard.
The integrated, extra-large sun canopy disappears elegantly behind a colour-coordinated visor. It can be extended incrementally, offering not only perfect sun protection but also protection against wind and rain.
Colours and Fabrics
Safety, Design and Functionality
Continuing the CYBEX tradition of having fashionable colours, the PLATINUM car seats come in a great range of colours in two fabric variations.
Comfort version: the soft and cozy comfort version of the Platinum car seats features 5 colour combinations.
Plus version: the Plus version gets its characteristic appearance through an exclusive, very hard-wearing fabric with a twill effect in a denim look. These child car seats are available in 7 different colours.
With the help of an adapter, the infant car seat can be attached onto any stroller or buggy from CYBEX, gb or other selected brands, so it transforms into a convenient travel system.
Absorbs the forces of an impact and protectively covers the baby
Extra wide Y-harness straps:
with soft belt and crotch pads
- Practical ISOFIX Base - Base Q-fix
The troublesome buckling up of the infant car seat is no longer necessary
The troublesome buckling up of the infant car seat is no longer necessary.
In accordance with our safety philosophy, which emphasises ease of use in general and the ISOFIX system in particular, the infant carrier comes with a practical base. The infant carrier can be easily snapped into the base and used without having to additionally secure it with the car seat belt. An indicator confirms that it has been installed correctly. The Base Q-fix is installed in the car with the ISOFIX connectors, providing additional stability and safety. Alternatively it can be secured with the car seat belt in vehicles that do not have the ISOFIX system.
- ISOFIX guides
Make car seat installation easier whilst protecting fabric and leather seating. A set is included with each CYBEX ISOFIX and ISOFIX Connect seat.
- Winter footmuff
- Rain cover
Wind and weather protection for all CYBEX infant car seats.
- Summer cover
Made of 85% cotton and 15% polyester
Made of 85% cotton and 15% polyester. Keeps the child comfortable and cool on hot summer days.
- Insect net
The net offers top protection against mosquitos and other insects. Thanks to the elastic material it fits the CYBEX car seats perfectly. Wash at 30°C if necessary.
length / width / height : 670, 440, 395-565 mm
weight: 5,4 kg
ECE R44/04, Gr. 0+
Fabric covers machine washable at 30°
Engineered and designed in Germany
Is this the right seat for my car?
We extensively test the suitability for all our products in all the latest vehicle models. Should your vehicle not appear please contact our customer service team for further assistance. We always recommend that you do a test installation at a qualified retailer to confirm individual compatibility. You should especially check that your vehicle model has ISOFIX anchorage points (US: LATCH ) and the length of the vehicle seat belt as this may vary, even during the same production year of manufacture.
Frequently Asked Questions (FAQ)
- Do both LSPs have to be pulled out for safety reasons?
To provide the best possible protection, the telescopic L.S.P. protector nearest the door should be extended as far as possible. It is designed with two settings. If in the longest setting, the L.S.P. touches the vehicle door, then the first setting must be used instead. When the seat is installed in the middle seat, the linear side-impact protection (L.S.P. System) should not be pulled out.
- Can I use this seat on a flight?
No, this seat is not approved for use on an airplane.
- Can I install the seat on the front passenger seat?
The car seat should only be installed on the passenger seat if the front airbag has been deactivated. Important: According to the Highway Code, it is against the law for your child to travel on a seat with an activated airbag. Placing your infant on a passenger seat with an activated airbag puts your child at risk of serious injury. For this reason, CYBEX always recommends installing the car seat on the vehicle’s rear seat (if possible behind the passenger). Statistics show that this is the safest place in the car. In a head-on collision, a child has a greater crumple zone on the rear seat where front airbags do not put your child’s safety at risk. If you have no choice other than to use the front passenger seat, please ensure that the seat is pushed back as far as possible.
- Can my child sit in the car seat in a forward-facing position?
No, according to standard R-129 children have to travel in a rearward-facing position until they are at least 15 months old. Your infant’s spine and neck muscles have not yet developed sufficiently to cope with heavier strains. In the event of an accident, the child’s head is propelled forward with a very high force. The child’s spine and neck muscles are not strong enough to withhold these forces. In rear-facing seats, the infant car seat works like a protective shield and protects the child’s sensitive head and neck.
- Is it ok to leave my child in the infant carrier e.g. at home?
CYBEX infant car seats have been engineered to offer the best possible protection for a baby during a car ride without affecting the child´s spine in a negative way. However, we do not recommend leaving the baby sleeping inside the infant car seat at home for long periods of time.
- What kind of clothing should my child wear when seated in the car seat?
Thick clothing prevents the harness from lying snugly against the body. This incorrect belt positioning could result in the harness slipping off the shoulder. For this reason, your child should wear everyday clothing. Thick clothing such as winter jackets should be avoided where possible. Once your child has been positioned in the seat, he/she can be covered with an extra blanket for warmth.
- How do I know when my child needs to change to a seat in the next group up?
We generally advise against switching from a rear-facing Group 0+ car seat (0-13kg, birth to approx. 18 months) to a forward-facing Group 1 seat (9-18 kg, approx. 9 months to 4 years) or to a combined Group 1/2/3 seat (9-36 kg, approx. 9 months to 12 years) prematurely. Even if your baby's feet protrude outside the car seat or your baby can already sit, your child has not necessarily grown out of the seat. However, if your baby's head is protruding above the top edge of the seat and your baby already weighs over 13kg, it is time to change the seat, as it no longer affords sufficient protection to the vulnerable neck and head area. After changing the seat, your baby’s head should be positioned within the protective area of the height-adjustable headrest of the Group 1 seat, enabling your child to see comfortably over the impact shield and to use the cushion as a play area. If your child disappears behind the impact shield, then he/she is definitely too small for a Group 1 seat.
- What do I do if my baby´s head falls forwards while driving, even though the infant carrier is positioned in the vehicle horizontally as indicated by the marker?
The marker on the side of the infant carrier should be aligned to the road level and not the car seat level. Many times during installation, the marker is measured to the level of the car which causes the infant carrier to be misaligned. If, for example, you have a small car, the angle of the rear seat may slope slightly, thus marginally differing from the level of the road. If the Aton is aligned to the slant of the rear seat, the infant carrier may be positioned in the car incorrectly and the baby´s head may fall forward. This is why it is necessary to align the Aton infant carrier to the level of the road. Therefore, please ensure that the marker on the side of the infant carrier is aligned correctly to the road level to ensure your baby’s head does not fall forward.
- Can I use the car seat and base even when the side airbag is activated?
Yes, the side airbag can remain activated when using the car seat.
- Do both side protectors (LSPs) have to be extended?
The L.S.P. Side-impact Protection has to be folded out on the side nearest the car door when the seat is installed either on the right or left-hand side of the rear seat. In this way, the best possible protection is provided in a collision. In this instance, it is important to ensure that only the side protector nearest the door is extended. If the seat is installed in the middle of the rear seat, the Linear Side-impact Protection (L.S.P. system) must not be used under any circumstances.
- Where should the infant’s head be positioned so that the headrest is set to meet the child’s needs?
The headrest should be set so that there is a space of no more than two finger widths between the child’s shoulders and the bottom of the headrest. The headrest can be adjusted to the height of your child using the headrest settings (eleven settings).
- Is it ok to keep using a seat after an accident?
We at CYBEX strongly recommend that you replace a seat after any kind of accident. This is because tiny hairline cracks, which may not be visible to the naked eye, can appear in the plastic parts of a seat after an accident. These cracks can pose an increased risk to safety.
- My car seat is faulty, how can I get it repaired?
Please refer to the retailer where you bought your CYBEX seat. They will deal with the matter on your behalf.
- Where can I get replacement parts for my product?
You can order replacement parts from a specialist retailer near you. To find a store near you, simply go to the store locator on our website: http://cybex-online.com/de/retailer.html
- Will CYBEX release an i-Size seat with a safety cushion? /When does CYBEX plan to launch a Platinum i-Size seat?
Whether and when CYBEX will bring out another i-Size product is unknown at this moment in time. The engineers at CYBEX are constantly working in close cooperation with experts from other leading brands and institutions involved in child safety to drive forward the development of new products. As soon as CYBEX decides to launch a new i-Size seat, we will announce our plans on our website and on social media.